Produse pentru bactoferm lhp uscat (6)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

cartridge dust collector ATEX with Multijet cleaning system, soundproof box, dust collection bin The cartridge dust collector MJT is a filtration system to purify the air used to dry the solid particles in suspension. It’s suitable for the extraction of potentially explosive dusts ( ATEX ) from painting operations. The input of the dust collector has been studied to have an optimum distribution of the fluid. The recovered material recovered discharged in a special bin installed under the hopper. The cartridge filter MJT is especially suitable for the intake of dust arising from powder coating of polyester, epoxy which may potentially cause explosive atmospheres ( ATEX ) . Benefits The cartridges are run by reading the pressure drop of the filter elements for a more efficient cleaning with a lower compressed air consumption and longer life of filter elements. Maintenance can be easily carried out thanks to special cartridge access door. The cartridge dust collector MJT has a...

Protech Balcony Solution based on special silane and siloxane resins in solvent, highly penetrating, transparent (colourless), for quickly, effectively and economically waterproofing balconies, tiled terraces, concrete roofings, external stairs, etc., without removing or intervening on the existing flooring. It does not change the appearance of the support on which it is applied and it does not alter the original slipperiness or its water vapour breathability. It is quick to apply and does not require skilled labour or professional equipment. The flooring treated will be usable after only 2 hours of laying. Protech Balcony is a product that is easy and quick to apply: simply spread it out with a scrubbing brush on clean and dry surfaces to solve the problem of infiltration. The active ingredient, effectively conveyed in a solvent, it penetrates fillings, substrate cracks and porosity rapidly and in-depth. Upon contact with air, it performs a polymerisation reaction that seals and waterproofs, perfectly and in depth, all discontinuities where it has managed to penetrate. After the reaction, the specific polymerised siloxane molecule is stable over time and does not labilise. Thus, the effective life of the product being applied on surfaces which are not subject to dynamic movements and seismic activity, is normally in excess of 10 years. If necessary, if new discontinuities, cracklings, cracks, fissures etc. appear after the first application of Protech Balcony, these may conveniently be resolved with a second application of the product. Given its intrinsically non-pellicular nature, the product will not be subject to fissures, tears, cracks, separations, deterioration and will not yellow over time, under the effects of UV rays (as occurs naturally for epoxy and/or polyurethane treatments). The surfacings treated with Protech Balcony will be resistant to mildew, moss, lichens and other biodeteriogenic bodies. Please note that the effectiveness in terms of water repellence, and watertightness of Protech Balcony has been certified with suitable tests conducted at the laboratories of the department of structural engineering of POLITECNICO DI MILANO (the Polytechnic of Milan). Quick waterproofing, of balconies, terraces, stairs, decks, tiled surfaces, concrete structures, and natural stones, without demolishing the existing flooring. Also for use on vertical surfaces particularly exposed to the inclemency of the weather and atmospheric agents (tiled, plastered, exposed brickwork, etc.). The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The vanishing points between tiles, if present, should be appropriately treated with suitable acid or alkali cleaners. In this respect it is recommended that the specific acid detergent Deterg-A, diluted with water at a ratio of 1:4. Rinse the treated surfaces with running water. Labile and non-adhering vanishing points, possibly removed, are required to be restored with high adhesion and deformability cement surfacers. In this respect it is advisable to use of the specific two-component waterproof and deformable filler Stucco Balcony. Wait for the necessary time (1-2 days) for drying the filling before applying Protech Balcony. Any expansion joints present, including those relating to the junction line of the tiled flooring and the perimeter kerb (typically made of granite or natural stone), will have to be sealed with high elasticity polymeric materials. In this respect, it is advisable to seal them with Protech Flex, assisted by laying Filtene Fondogiunto and the appropriate polyurethane primer Protech Flex Primer. Pour small amounts of product at a time and spread it evenly over the entire surface with a scrubbing brush or a "water squeegee", until complete impregnation of the support to be waterproofed. Set Protech Balcony with all due care in less accessible and more uncomfortable areas, by using a brush with long bristles or a sponge (edges, skirting boards, corners, sills, wells, chimney flues, discharges, etc.). Allow the product to penetrate for at least 60 minutes. Within maximum 120 minutes of application, remove the excess product on all surfaces treated with a cloth soaked in the diluent Nitro. The product consumption is on average about 0,125 l/m² of surface to be waterproofed; varying according to the absorption of the support and the size of any vanishing points. Normally it is considered that with 1 litre of Protech Balcony you can treat from 7 to 15 m² of surfaces. Packaging: 2-liter can UM: €/l

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Baghouse dust collector with dirty air inlet in the pre-chamber,bin collection, rockwool insulation and buffers with aluminium sheets The Pulco Air HTB baghouse filter is a dry filtration system used to treat a wide range of pollutants. Its installation allows treatment of a vast range of pollutants and guarantees the quality of the air in the production environment and protection for workers. Filter inlet is composed of a pre-chamber, which recovers the bigger powder particles. Benefits The baghouse filter is composed and configured on the base of type of use and the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor, that reads the pressure drop of the filtering elements, encouraging minor compressed air consumption and greater duration of the bags. The pre-chamber recovers the biggest powder particles, safeguarding the baghouses from excess loads of pollutants and guaranteeing longer duration. HTB baghouse filter is composed...

ATEX baghouse dust collector with dirty air inlet in the hopper, rotary valve, explosion-proof panels. The Pulco Air ATEX NSVA baghouse filter is a dry filtration system used if there are potentially explosive powders to purify the air of suspended solid particles. Its installation allows treatment of a vast range of pollutants. The dirty air inlet takes place directly in the hopper and the recovered material is unloaded in the rotary valve. The explosion-proof panels, necessary in an explosion to release excess pressure, are installed in a specific raised section. Benefits The baghouse filter is composed and configured on the base of type of use and on the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor that reads the pressure drop of the filtering elements encouraging minor compressed air consumption and greater duration of the bags. The hopper is equipped with a rotary valve to continuously release the powder and...